Renesas Converter Board M3T-F160-128NRD - Manual (Page 5)

( 3 / 4 )
5. Connection Procedure (See Figure 3)
The procedure for connecting the M3T-F160-128NRD is
shown below.
(1) Mount the NQPACK128RD on the target system.
(2) Attach the YQPACK128RD on the NQPACK128RD.
(3) Secure the four corners of the YQPACK128RD with the
YQ-GUIDE's.
• Do NOT use the screws included with the
YQPACK128RD.
• Do NOT use the screwdriver included with the
NQPACK128RD that is used only for the
HQPACK128RD.
(4) Attach the probe of the emulation pod to the M3T-F160-
128NRD.
(5) Attach the M3T-F160-128NRD on the YQPACK128RD.
Figure 3 Connection procedure
6. External Dimensions and a Sample Foot Pattern
Figure 4 External dimensions and a sample foot pattern
Unit: mm
M3T-F160-128NRD
YQ-GUIDE's (x4)
YQPACK128RD
NQPACK128RD
128-pin 0.5-mm-pitch
(128P6Q-A) foot pattern
FLX160-PRB
or
M3xxxxTx-EPB
Use a slotted screwdriver.
: Position of No. 1 pin
Be sure to align the pins.