Ricoh Aficio IS 2315 - Manual (Page 85)

Copy Paper
79
9
*1 Paper weight: 80 g/m 2 , 20 lb
*2 When you set custom size paper in the bypass tray, You can specify the size.
*3 8K(Ba-Kai) = 267
× 390 mm, 10.6" × 15.4"
*4 16K(Shi-Lui-Kai) = 195 × 267 mm, 7.7" × 10.6"
*5 Set one sheet at a time for your needs.
Important
❒ If you use damp or curled paper, a misfeed might occur. In such a case, try
turning over the paper stack in the paper tray. If there is no improvement,
change to copy paper with less curl.
Note
❒ When using the bypass tray, we recommend you set the copy paper direction
to L.
Reference
To change the paper size, see p.59 “Changing the Paper Size”.
Unusable Paper
R CAUTION:
Important
❒ Do not use any of the following kinds of paper or a fault might occur:
• Art paper
• Aluminum foil
• Carbon paper
• Conductive paper
❒ Do not use copy paper that has been already copied on. Otherwise, a paper
misfeed might occur.
Note
❒ Do not use any of the following kinds of paper or a misfeed might occur.
• Bent, folded, or creased paper
• Torn paper
• Slippery paper
• Perforated paper
• Rough paper
• Thin paper that has low stiffness
• Paper with a dusty surface
❒ If you make copies on rough grain paper, the copy image might come out
blurred.
❒ Do not use paper already copied or printed on.
• Do not use aluminum foil, carbon paper, or similar conductive paper to avoid
a fire or machine failure.
KirC3a_oi_AE-F_FM.book Page 79 Friday, March 10, 2006 10:25 AM