Radio Shack 60-501 - Manual (Page 3)

3
n
Notes:
• It takes about 30 minutes to charge the Li-Po battery.
• Replace the AA batteries the in the charger when the red
LED does not light.
• You also can use a DC 9V 300mA AC adapter (not
included) to power the charger.
2
Install Li-Po and 9V Batteries
1. Turn off the car and controller.
2. Insert one 9V battery (not supplied) in the controller’s
battery compartment matching the polarity (+ and –)
marked inside.
3. Unscrew the battery cover of the chassis and install the
fully charged Li-Po battery, matching the polarity marks
inside. The battery only fits one way.
4. Replace the cover and tighten the screw.
9V