Radio Shack PRO-82 User Manual

Page 8

repa

rat
ion

2. Pull the battery holder out of

the battery compartment.

3. If you are using non-

rechargeable batteries, place
them into the black holder, as
indicated by the polarity
symbols (+ and –) marked on
the holder. Or, if you are using
rechargeable batteries, place
them into the yellow holder,
as indicated by the polarity
symbols (+ and –) marked on
the holder.

4. Place the battery holder into

the battery compartment.

5. Replace the cover.

When

8888

appears and the scanner

beeps or the scanner stops
operating properly, replace or
recharge the batteries.

Rý

If the scanner stops working prop-
erly after connecting it to power,
try resetting it. See “Resetting the
Scanner” on Page 39.

%JCTIKPI"

4GEJCTIGCDNG"$CVVGTKGU"

Your scanner has a built-in
charging circuit that lets you
charge nickel-metal hydride (Ni-
MH) or nickel cadmium (Ni-CD)
rechargeable batteries (not
supplied) while they are in the
scanner. To charge rechargeable
batteries, you need to use a 9V
AC adapter (RadioShack Cat. No.
273-1767) or 10V DC adapter
(Cat. No. 273-1830) and a size C
Adaptaplug™ adapter (neither
supplied). Both are available at
your local RadioShack store.

"9#40+0)"

Dispose of old
batteries promptly
and properly. Do not
burn or bury them.

"%#76+10"

If you do not plan to
use the scanner with
batteries for a month
or more, remove the
batteries. Batteries
can leak chemicals
that can destroy
electronic parts.

"016'"

Installing
Batteries

You must charge
rechargeable
batteries before you
use them the first
time. See “Charging
Rechargeable
Batteries”.

Charging
Rechargeable
Batteries

It takes about 15
hours to recharge fully
discharged 1500mAh
Ni-MH rechargeable
batteries. You can
operate the scanner
while recharging the
rechargeable
batteries, but charging
takes longer.

20-315.fm Page 8 Wednesday, July 24, 2002 2:27 PM