Radio Shack PRO-82 - Manual (Page 26)

S
e
ar
c
h
in
g
th
e O
n
e To
u
c
h B
a
nk
s
26
Page 30. To listen to the weather
bank, see “Listening to the
Weather Band” on Page 31.
1. Press FD/PD , AIR , or HAM .
FeB?9; FeB?9; FeB?9; FeB?9;
,
7?h 7?h 7?h 7?h
, or
>7C >7C >7C >7C
appears.
After about 2 seconds, the
scanner starts searching.
When the scanner finds an
active frequency, it stops
searching and displays the
frequency's number.
±
2. To search for another active
frequency in the selected
band, hold down
H or G for
about 1 second. To search for
an active frequency within a
sub-band of the fire/police or
ham band, press a number
key to select the sub-band
you want. To select a different
band and search for another
active fre-quency, repeat Step
1.
Once you find interesting frequen-
cies during the search, you can
store them into the scanner’s
channel-storage banks. Frequen-
cies found in the one touch banks
are automatically assigned to
specific channel-storage banks as
shown below. You can quickly scan
the channel-storage banks corres-
ponding to the one touch banks by
pressing a one touch bank key
and
SCAN/MAN successively.
5GCTEJ"$CPMU
%JCPPGN"5VQTCIG"
$CPMU
Fire/Police 4, 5
Aircraft 6
Ham 7, 8
±
"016'"
±
"
• To reverse the
search direction at
any time, hold
down
H or G for
about 1 second.
• To search up or
down the band in
small increments,
repeatedly press
H
or G . (See “One
Touch Banks” on
Page 20 for
frequency steps).
• To pause the
search while
receiving a signal,
press
H or G . To
resume searching,
hold down
H or G .
• To quickly move
up or down
through the
frequencies, hold
down
H or G . The
scanner tunes
through the fre-
quencies until you
release
H or G .
• If necessary, you
can select search
groups using the
number keys.
20-315.fm Page 26 Wednesday, July 24, 2002 2:27 PM