Radio Shack PRO-82 - Manual (Page 24)

O
per
ati
o
n
24
12'4#6+10
6WTPKPI"1P"VJG"5ECPPGT1
5GVVKPI"8QNWOG"CPF"
5SWGNEJ
1. Turn SQUELCH until the
indicator points to MIN before
you turn on the scanner.
2. To turn on the scanner, turn
VOLUME clockwise until you
hear a hissing sound.
3. Turn SQUELCH clockwise, just
until the hissing sound stops.
±
4. To turn off the scanner when
you finish, turn VOLUME
counterclockwise to OFF .
5VQTKPI"-PQYP"
(TGSWGPEKGU"+PVQ"%JCPPGNU
Good references for active frequen-
cies are the RadioShack Police
Call Guide including Fire and Emer-
gency Services, Official Aeronauti-
cal Frequency Directory, and Mari-
time Frequency Directory. We up-
date these directories every year,
so be sure to get a current copy.
1. Press PGM .
F=C F=C F=C F=C
appears.
Then enter the channel
number (1-200) where you
want to store a frequency,
then press
PGM again.
2. Use the number keys and
DELAY/ ´ to enter the frequen-
cy (including the decimal
point) you want to store.
3. Press ENT to store the
frequency into the channel.
±
±
"016'"
±
"
Turning On the
Scanner/Setting
Volume and
Squelch
• To listen to a weak
or distant station,
turn SQUELCH
counterclockwise.
If reception is poor,
turn SQUELCH
clockwise to cut
out weak
transmissions.
• If SQUELCH is
adjusted so you
always hear a
hissing sound, the
scanner will not
scan or search
properly.
Storing Known
Frequencies Into
Channels
• If you made a
mistake in Step 2,
;hheh ;hheh ;hheh ;hheh
appears and
the scanner beeps
three times when
you press ENT.
Simply start again
from Step 2.
20-315.fm Page 24 Wednesday, July 24, 2002 2:27 PM