RCA 2-9291 - Manual (Page 17)

17
T
ROUBLESHOOTING
T
IPS
T
ELEPHONE
Problem Solution
No dial tone. • Check hook switch to make
Won't dial out sure it pops up.
• Make sure TONE/PULSE is set to correct
position.
• Unplug the phone, wait 30 seconds, and
plug the phone back in.
Phone doesn’t ring • Check RINGER VOLUME.
• Could have too many phones on one line.
(See FCC registration information regarding
REN).
Light and tone • This is normal as power is fluctuating
feedback flutter when with phone outpulsing.
dialing in PULSE mode.
Can’t be heard by • Make sure coiled phone cord is securely
other party plugged in.
• Make sure other phones are not OFF hook at
the same time. If so, this is normal condition
as volume drops when additional phones are
used at once.
Memory dialing • Make sure you entered numbers correctly.
(See "Memory Dialing.")