Radio Shack PRO-90 - Manual (Page 23)

23
4. Use the number keys and • to enter the frequency
that is the upper limit of the range you want to
search.
5. Press LIMIT , then press SRCH . The scanner begins to
search from the lower limit to the upper limit.
6. When the scanner stops on a transmission, quickly
press either:
• E to store the displayed frequency into the chan-
nel. The scanner stores the frequency and con-
tinues searching.
• s or t to stop searching so you can listen to the
transmission. HOLD appears.
To release hold and continue searching, press
SRCH .
Notes:
• To step through the frequencies while HOLD
appears, press s or t.
• If you tune to a search skip frequency, L/O
appears. See “Locking Out Channels and Frequen-
cies” on Page 27.
• To skip data signals (such as modem signals), press
DATA . See “Skipping Data Signals” on Page 31.
SCANNING SERVICE BANKS
You can scan for police, fire/emergency, aircraft, marine,
and weather transmissions even if you do not know the
specific frequencies that are used in your area. And, you
can store any of the frequencies you find into channels.
20-520.fm Page 23 Wednesday, August 4, 1999 3:06 PM