Renesas Emulation Pod M30830T-EPB - Manual (Page 33)

( 31 / 72 )
Table 3.3 Switch settings of the M30830T-EPBM (2/2)
Signal Switch Setting Description
P87/X
CIN
/
V
CONT
SW4
SW5 P86/X
COUT
Connects the P87/X
CIN
/V
CONT
pin of the MCU to the
LPF in the emulation probe (uses the P87/X
CIN
/
V
CONT
pin as LPF for PLL).
Does not connect the P86/X
COUT
pin.
Connects the P86/X
COUT
pin of the MCU to the
GND in the emulation probe (uses the P86/X
COUT
pin as LPF for PLL).
Connects the P87/X
CIN
/V
CONT
pin of the MCU to the
sub-clock oscillator circuit (32.768 kHz).
Connects the P87/X
CIN
/V
CONT
pin of the MCU to the
target system (uses the P87/X
CIN
/V
CONT
pin as
P87).
Connects the P86/X
COUT
pin of the MCU to the
target system (uses the P86/X
COUT
pin as P86).
(Factory-setting)
LPF XCIN P87
LPF XCIN P87
LPF P87
(Factory-setting)
LPF NC P86
XCIN
LPF NC P86
LPF P86 NC