Remington BV12199A User Manual
Page 10
6
|
4. Connect the lower and upper vacuum
tubes together (see Figure 3-9). Align
the ridge on the bottom tube with
the channel on the top tube. Press
together until you hear a “snap”.
5. Connect the tubes to the vacuum tube
adaptor (see Figure 3-10). Align the
tab on the top tube with the notch
on the vacuum tube adaptor. Press
together until you hear a “snap”.
6. Position front of vacuum tube adaptor
assembly over vacuum bag adaptor
hook (see Figure 3-11).
7. Pivot vacuum tube adaptor assembly
to bottom of blower/vac housing.
Slightly press locking lever on vacu-
um tube adaptor to allow adaptor to
lock into place (see Figures 3-12 and
3-13).
Converting from
Blower to Vacuum, continued
Figure 3-10: Connecting vacuum tubes to vacuum tube
adaptor
Figure 3-11: Attaching vacuum tube adaptor to
blower tube hook
Figure 3-12: Pivoting vacuum tube adaptor to
blower/vac housing
Figure 3-13: Pressing locking lever
Figure 3-9: Conntecting lower and upper vacuum tube
together
Chapter 3: Blower/Vac Assembly
118034
3
4
5
Notch
Tab
2
1