Ricoh Rioch 5 Mega Pixel CCD Monochrome PoCL Camera Link Camera FV-L500B1 User Manual
Page 29
29/31
FV-L500B1
User’s Guide Rev. 1.02
Command No.
Command Descriptions
68H:
DIGITAL_
CLAMP[7
0]
[Digital clamp] Initial data: DIGITAL_CLAMP[7..0] = 0
Sets the digital clamp.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D5:
No function
Always set as “000”
D4:
Mirror image
0: Normal image
1: Mirror image
D3:
No function
Always set as “0”
D2:
Clamp mode
0: Auto adjust
1: Manual adjust
D1 to D0:
No function
Always set as “00”
The following two settings have to be set when the “manual adjust” is selected at the clamp mode:
Manual digital clamp (Left): MD-CLAMP_L[15..0] (6A & 6BH)
Manual digital clamp (Right): MD_CLAMP_R[15..0] (6C & 6DH)
6AH:
MD_CLAMP_L
[7
0]
6BH:
MD_CLAMP_L
[15
8]
[Manual digital clamp (Left)]
Initial data: MD_CLAMP_L[15..0] = The factory adjusted value, data range: 0 to 1023
Sets the manual digital clamp for the left side of the image when the manual adjust is selected at the digital
clamp (68H).
6CH:
MD_CLAMP_R
[7
0]
6CH:
MD_CLAMP_R
[15
8]
[Manual digital clamp (Right)]
Initial data: MD_CLAMP_R[15..0] = The factory adjusted value, data range: 0 to 1023
Sets the manual digital clamp for the right side of the image when the manual adjust is selected at the digital
clamp (68H).
78H:
TESTP[7
0]
[Test pattern selection] Initial data: TESTP[7..0] = 0
Sets the test pattern output from the camera.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
00H:
Video output
01H:
Gray scale
02H:
Ramp wave
03H:
Uniform gray level (100% white)
04H:
Uniform gray level (variable level)
05H:
Color bar (RGB bayer)
Others:
Black