RoyalTek RMP-8200 - Manual (Page 6)

6
2. Connect the plug to the power adapter.
To disconnect, please push the button and push out the plug.
Notes:
If The RMP-8200 CINEMA ON-THE-GO power is off, allow 3 hours for the
battery to fully recharge. The battery will stop charging if The RMP-8200
CINEMA ON-THE-GO power is on to avoid damage caused by high operating
temperature. The battery can also be charged by connecting The RMP-8200
CINEMA ON-THE-GO to a computer USB port. This method will fully charge
the battery in six hours. The battery has a lifespan and ages every time it is
fully charged and discharged. The battery will gradually loose charge capacity
as it ages. Therefore, as the battery ages the battery life will decrease due to
natural loss.