RoyalTek RMP-8200 - Manual (Page 29)

29
Green Power
Amber Charge
Red Low battery
*LED indicator
Blue Key pad
Video H.264, MPEG4, AVC
Audio MP3
Picture JPG, JPEG, BMP
File format
Other Word, Power Point, Excel, Text, PDF reader
Right after Red LED light is on, plug in with attached power adaptor immediately
is recommended. If not, the system will automatically shut-off to protect battery
from over-discharge. To solve the shut-off, plug in with the power adapter in place,
switch off and then switch on. The system should work properly.
Trouble Shooting
Q: The device will not turn on.
A: • The battery is installed in the wrong orientation.
See “Insert the battery” on
page 4
Try to remove and replace the battery.
• The battery is not properly installed, or the power adapter is not connected to
the device and a working wall outlet. Test the electrical outlet by plugging
another electrical device (like a CD,DVD player) into the wall outlet to confirm
that the wall outlet works.
Q: The status indicator is red or no light
A: • The battery needs to be charged or reinstalled.
Q: The image is not visible or is very dim.
A: The ROYALTEK RMP-8200 CINEMA ON-THE-GO is a battery-operated device
and requires in controlled lighting conditions for good performance. The image
may appear very dim in brightly lit rooms.
• Project the image on a flat, white surface.
• Decrease the light on the surface where the image is being projected.
• Decrease the size of the image.
Q: My video device is connected to the device but the device will not display