Renesas H8/3062 - Manual (Page 30)

16
6. The P1 jumper is used for testing. A jumper pin is inserted in pin 1 side. Do not remove the
inserted jumper pin.
CAUTION
Insert the jumper pin in pin 3 side for P4 jumper when pin
10 of the MCU is not used as
RESO. Otherwise the user
system interface cable, the emulator product, and the user
system will be damaged.
P4
3 1
P1
3 1
P4 jumper
Pin 10 of the MCU is used as
RESO
: Pin 1 side disconnected
Pin 10 of the MCU is not used as
RESO
: Pin 3 side disconnected (setting at shipment)
Figure 11 Jumper