Riccar SUPRALITE RSL2C - Manual (Page 6)

4
The vacuum cleaner handle is packed
as a separate component that requires
assembly.
VACUUM ASSEMBLY PROCEDURE
Installing the handle:
1. Release the handle bracket from
the handle tube by removing the
two screws (diagram 1).
2. Place handle onto the handle
tube, aligning holes with pegs
(diagram 2).
A
SSEMBLING THE
V
ACUUM
1
2
Handles
Nozzle
Cloth Bag
Power
cord
IMPORTANT NOTE: Under no circumstances should you plug in the vacuum
cleaner prior to complete assembly.