Renesas User System Interface Board HS7047ECH61H - Manual (Page 17)

8
2.3 Recommended Dimensions for User System Mount Pad (Footprint)
Figure 4 shows the recommended dimensions for the mount pad (footprint) for the user system
with an IC socket for an FP-100M package (IC149-100-054-B51: manufactured by YAMAICHI
ELECTRONICS Co., Ltd.). Note that the dimensions in figure 4 are somewhat different from
those of the actual chip's mount pad.
0.50 × 24 = 12.00 ± 0.05
Unit: mm
0.50 ± 0.05
0.50 × 24 = 12.00 ± 0.05
13.80 max
17.10 min
0.50 ± 0.05
0.30 ± 0.05
Figure 4 Recommended Dimensions for Mount Pad