Ricoh RDC-5300 - Manual (Page 24)

22
Playback
Changing the Flash Mode (p.54-56)
q
Set the mode dial to [ ].
w
Press the flash mode button to select a
flash mode.
You can choose Flash Off (
), Auto ( ),
Forced Flash ( ), or Slow synchro mode
( : flashing).
The selected mark will be displayed on the
LCD monitor or on the LCD panel.
e
Press the shutter release button to
record the image.
Using the Self-Timer (p.61-62)
q
Set the mode dial to [ ].
w
Press the self timer button.
The self timer is now set.
The
mark will be displayed on the LCD
monitor or on the LCD panel.
e
Press the shutter release button to
record the image.
The self timer LED will start flashing and the
shutter will be released after a delay of
about 10 seconds.
Playing Back Files (p.78-79)
q
Slide the power switch on and set the
mode dial to [
].
w
Press the CARD/IN button to select the
playback destination.
e
Press the or button to select a file
you wish to view
* The multi-image and zoom playback features allow
you to view several image files at once or magnify an
image. (p.80, 81)