Ricoh RDC-5300 - Manual (Page 16)

14
■ Error Messages
If any of the error messages listed below appears on the camera’s LCD monitor, read
the corresponding explanation and take the corrective action suggested.
Error message
Error
Message
Explanation and Remedy
Reference
Page
The SmartMedia memory card is
unformatted. Format the card with the
camera before using it.
Format the internal memory before using it.
A SmartMedia memory card of this type is
not supported by this camera.
Slide the power switch to turn the power off
and then on again.
P. 33
P. 105
–
FORMAT CARD
FORMAT
INTERNAL
MEMORY
CARD ERROR
ERROR
XX-XX-XX-XX-XX
If the error display does not clear, reset the LCD monitor to its factory default:
How to reset: With the terminal cover open, press the reset button (p. 10). If
the error display still won’t clear, call your dealer or our service contact.
LCD Panel
■ Initial display (SETUP mode)
Note
The LCD panel appears
blank.
F O R M A T
I N T E R N A L
M E M O R Y
–