1 connector specifications – Ricoh Gig# Vision VGA Monochrome CCD Camera FV-G030B1 User Manual
Page 3
3/38
FV-G030B1
User’s Guide Rev. 1.02
1 Connector Specifications
1.1 RJ45 Connector
This product is NOT a PoE type. Apply power (+10.8 to +26.4Vdc) ONLY through the I/O connector.
Pin Assignment:
LED Information:
Pin No.
Signal Name
1
TA+
2
TA-
3
TB+
4
TC+
5
TC-
6
TB-
7
TD+
8
TD-
Please use a 1Gb supported NIC, HUB and LAN cable. Check that the NIC and HUB being used is “1Gb
transferring”.
Damaging or mishandling the CAT5e cable may cause the transferring speed to change from 1Gb to 100Mb.
If this happens, please replace the CAT5e cable.
Green LED
Yellow LED
Status
Green Light ON
Orange Light ON
Power ON
Green Light ON
Orange Light Blinking
1Gb Transferring
Light OFF
Orange Light Blinking
100 Mb Transferring
Power-I/O Connector
DC Iris Lens Connector
RJ45 Connector
The camera is powered-on
Green light: ON
Yellow light: Blinking
1 Gb Transferring
Green light: OFF
Yellow light: Blinking
100 Mb Transferring