Rio Audio Rio Nitrus 41000855-004_B - Manual (Page 10)

Table of Contents Index
6 Rio Nitrus
Chapter 2
Connections
:: Basic Connections
This chapter describes how to connect the Rio Nitrus to power adapters, USB cables, and
alternate audio devices. Basic connections include:
AC Power Adapter
Connect the AC adapter to the DC IN port on the player. The AC adapter will recharge the
battery, from 0% capacity to 60-70% capacity, within two hours.
1 Plug the AC adapter into an electrical outlet.
2 Connect the AC adapter to the Rio Nitrus.
3 After the battery is fully charged, remove the AC adapter from the Rio Nitrus.
Batteries
The Rio Nitrus uses a built-in lithium-ion rechargable battery that lasts many hours
per charge. Lithium-ion batteries drain at a very slow rate even when they are not
being used. If you have not used your Rio Nitrus in a long period of time you will
need to recharge the battery.
The battery should be charged for at least five hours during its initial charge. The
player will recharge anytime the AC adapter is plugged into the player.
Power Indicator
Full
Half
Low
Charging
(indicator grows)
Empty
(indicator flashes)