Rosewill RC200 User Manual
Page 21
ULTRA ATA/133 PCI RAID Card
RC200 User Manual
21
for setting mirror.
c. Turn on PC and enter RAID BIOS to set mirror. Choose “Manual” and then select
the original HD as the data source to complete mirror. The copy will take a long time
depending on your HD capability. After data copy complete, save and left RAID
BIOS.
Important message: If you choose the wrong HD source at the step of
“manual”, all your data will be lost.
d. Reboot your PC and now you can enter your OS with RAID 1. (Please change the
booting sequence in CMOS if necessary)
Detail guide:
For Windows® 98 SE
＊
For New Windows® 98SE Installation
Setup the RAID Array prior to Windows installation.
1.
Install the board and follow Microsoft procedures to install Windows® 98 SE
accordingly.
2.
Once Windows has been installed, right click My Computer and click Properties.
Select Device Manager tab.
3.
Double click PCI RAID Controller listed under Other Devices.
4.
Select Driver tab, then click Update Driver button.
5.
Insert the driver CD into the CD-ROM Drive and click Next.
6.
Select Search for the best driver for your device(Recommended) from the following
dialog box and type