Roberts Radio ecologic 7 User Manual

Page 23

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

To return to auto clock set mode

1. Press

the

On/Off button to switch on the radio. If necessary press and

release the DAB/FM/AUX button to put the radio into DAB mode.

2. Press

the

Menu button once or twice as needed until "Main Menu"

appears on the display. Rotate the Tuning/Select control until "Set
up" shows on the display.

3. Press and release the Tuning/Select control to enter the Set up menu

and rotate until "Clock" appears on the display. Press and release the
Tuning/Select control to enter clock setup.

4. Rotate

the

Tuning/Select control until "Auto clock" appears on the

display.

5. Press and release the Tuning/Select control.

6. The radio will immediately set its time according to the information

received with the DAB broadcast. The radio will return to normal radio
operation.

Note: If you select "Auto clock" and no DAB signal is found, you should
either position the radio or its aerial so that a signal can be received, or
revert to manual clock mode (see page 20).

2-5