Roberts Radio ecologic 7 User Manual

Page 14

Dynamic Range Control (DRC) settings - DAB

DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment. This function is only for the DAB waveband.

1. Press

the

On/Off button to switch on your radio.

2. Press and release the Menu button so that "Manual tune" appears on

the display.

3. Rotate the Tuning/Select control until the display shows "DRC

value". Press and release the Tuning/Select control to enter the DRC
adjustment mode.

4. Rotate

the

Tuning/Select control to select the required DRC setting

(default is 0).

DRC 0 DRC is switched off, Broadcast DRC will be ignored.

DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

DRC 1 DRC is set as sent by broadcaster.

5. Press and release the Tuning/Select control to conﬁ rm the setting.

The display will return to normal tuning mode.

Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.

3-5