RCA D52W23 - Manual (Page 24)

Using the HD Monitor’s Features
22 Chapter 3
Channel Banner
There are several indicators that might appear when you press the TV or INFO
button on the remote. The list at the bottom of this page describes the items on
the Channel Banner screen (left to right and top to bottom).
4/3 format Current screen format. Press the FORMAT button on
the remote control to change this setting.
Stereo (or Dual) Current sound type. Dual means that the HD Dual Dual
Monitor will take both mono and stereo signals.
Parental Controls are locked. See page 30 for
information on how to change this setting.
CC Shows that Closed Captioning is available for the
current input signal.
03:45 pm Current time.
VID1 Current input. Press the INPUT button on the remote
to move to a different input.
Commercial skip 0:30 Shows the time remaining on the commercial skip
(SKIP) timer.
Sound is muted. Press the MUTE button to unmute
the sound.
Sample channel banner
4/3 format Stereo cc 03:45 pm
VID1
Commercial skip 0:30
Your remote's device buttons
TV
ON•OFF DVD
AUX•HD
Autotuning
The autotuning feature automatically tunes the HD Monitor to the correct input
for different devices you have connected to your HD Monitor (like a VCR, DVD
player, etc.) When you set up autotuning in the menu system you don’t have to
remember to change your HD Monitor to the CMP1 input, for example, when
you want to watch a DVD on your DVD player.
Why You Should Use the Autotuning Feature
Autotuning lets you go directly to the input you assign to a device button. For
example, if you have a DVD player connected to the CMP1 input, you can have
the autotuning feature go directly to the CMP1 input when you press the DVD
button (instead of going through the inputs until you fi nd the DVD signal).