beautypg.com

16 chapter 2 – RCA D52W23 User Manual

Page 18

background image

16

Chapter 2

Using the Remote Control

The Buttons on the Remote Control

(0-9) Number Buttons Enter time settings directly with the remote control. The
number buttons may also work with other devices if the remote control is programmed
to control those devices.

ANTENNA In VCR mode (if programmed), this button works as a TV/VCR button for
some VCRs. In SAT mode (if programmed), this button works as a TV/SAT button for
some satellite receivers.

Arrows Used to highlight different items in the HD Monitor menu and to adjust the
menu controls.

AUX•HD Puts the remote in AUX/HD mode. As a default, this button controls some
models of RCA HDTV Tuners. It can also be programmed to operate some brands of
other remote-controllable devices.

CC Displays a reduced Closed Captioning menu, allowing you to turn closed
captioning on and off or change the closed captioning mode. Use the up and down
arrow buttons to highlight the setting you want to change. Use the left and right arrow
buttons to change the highlighted setting.

CH + or CH - Scans up or down through the HD Monitor's input list. The CH buttons
may also work with other devices if the remote control is programmed to control those
devices. In DVD mode (if programmed), these buttons work as chapter advance or
chapter reverse buttons with some DVD players.

CLEAR Removes any menu or display from the screen and returns you to normal

CLEAR

CLEAR
viewing.

DVD Puts the remote in DVD mode and, if Autotuning is enabled, will turn on the HD
Monitor and tune to the correct input channel.

FORMAT Changes the current format (aspect ratio and magnifi cation) of the image on
the screen.
FREEZE In TV mode, the FREEZE button freezes the picture on some input signals.
Press any button on the remote to resume normal viewing. The FREEZE feature
automatically times out after a short time. Please note that when you "unfreeze" you go
back to live programming (skipping any programming that occurred during the freeze).

Note: The FREEZE feature does not work on signals from the DVI-HDTV or CMP1

inputs in progressive scan (480p) or HDTV (1080i) modes.
Do not use the Freeze feature for an extended period of time. This can cause the

image to be permanently imprinted on the picture tube. Such damage is not covered

by your warranty. Press any button to unfreeze the picture at any time.

GO BACK Returns you to the previous input channel.

GO BACK

GO BACK

GUIDE Brings up the Channel Guide menu.

Channel Guide

Channel Guide

Indicator Indicates the programming mode when programming the remote to control
devices. The indicator lights up when you press a valid button on the remote. It fl ickers
when the remote batteries are low and you press a button.
INFO Brings up channel banner; press again to clear the screen.

INPUT Press to toggle through the available input sources (VID1, VID2, FRNT, CMP1
and DVI).

MENU Brings up the Main menu.

MENU

MENU

Indicator

FORMAT

FORMA

FORMA

DVD

AUX•HD

TV

CH

ON•OFF

CLEAR

MENU

INFO

SKIP

RECORD

STOP

PAUSE

PP

FORWARD

PLAY

PLA

PLA

REVERSE

ANTENNA

1

2

3

4

5

6

7

8

9

0

ok

PRESETS

GUIDE

MUTE

VOL

INPUT

GO BACK

CC

SLEEP

FREEZE