RCA MR29410 - Manual (Page 20)

C HAPTER F OUR : TV O PERATION
4.5
O P E R AT I O N
3
Press .
The TV will begin
memorizing all of the
available channels.
4
After all the available
channels are stored, the
Auto program menu
reappears. Press
MENU•PROG twice to
exit.
Storing Channels in Memory (Automatic Method)
▼
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press MENU•PROG at any time to
interrupt the memorization process
and return to the Channel menu.
2
Press to select “Auto
program”.
1
Select the correct signal
source (ANT, STD, HRC,
IRC). See steps 1~4 on
the previous page.
Press MENU•PROG; then
press
twice to select
“Channel.”
Press to access the
Channel sub-menu.
1577575A.04 11/15/01 10:32 AM Page 5