RCA MR29410 - Manual (Page 16)

O P E R AT I O N C h a p t e r 4
O
P E R AT I O N
Plug & Play Feature
After turning the TV on, you can automatically set five basic settings in the following
order: language, video signal source, antenna input check, auto program, and the clock.
1
Press TV button on the remote
control.
The message “Plug & Play” is
displayed. It flickers for a little
while and then the
“Language” menu is automati-
cally displayed.
Turning the TV On and Off
Press TV on the remote. You can also use the POWER button on the front panel.
NOTE: Illustrations are for representation only. Your product and on-screen
displays might differ.
C HAPTER F OUR : O PERATION
4.1
2
Press or to select the
desired language. Press
MENU•PROG to enter the lan-
guage. The “Channel” menu is
automatically displayed.
3
Press or to select
required video signal source.
Press MENU•PROG to enter
the video signal source. The
“Ant. Input check” is automati-
cally displayed.
continued...
1577575A.04 11/15/01 10:32 AM Page 1