RCA MR29410 - Manual (Page 17)

4.2
C HAPTER F OUR : TV O PERATION
Viewing the Menus and On-Screen Displays
Viewing the Menus
▼
1
With the power on,
press MENU•PROG.
The main menu appears
on the screen. Its left
side has four icons:
Picture, Sound, Channel,
and Function.
On-screen menus disappear
from the screen after about thirty
seconds.
▼
You can also use the MENU,
CHANNEL, and VOLUME buttons
on the control panel of the TV to
make selections.
2
Use or to highlight one of the 4 icons. Then press to
access the icon’s sub-menu.
3
Press MENU•PROG to exit.
O P E R AT I O N
4
Make sure that the antenna is
connected to the TV and press
or . The “Auto Program” is
activated. Press MENU•PROG
to skip this step. (Refer to
“Auto program” on page 4.5.)
5
Press or to move to the
hour or minute. Set the hour
or minute by pressing
or
. (Refer to “Setting the
clock” on page 4.8.)
6
When you have finished,
press MENU•PROG button.
The message “Enjoy your
watching” is displayed.
Note: Plug & Play feature doesn’t work in the A/V mode.
▼
If you want to reset this feature
(1) Press MENU•PROG button.
(2) Press three times to select the
Function menu and press .
(3) Press to select Plug & Play
and press .
The message “Plug & Play” is dis-
played.
1577575A.04 11/15/01 10:32 AM Page 2