Radio Shack ET-1104 - Manual (Page 14)

14
USING MUTE
To talk to someone in the room without
the person on the other end of the
phone line hearing your conversation,
press
MUTE . The MUTE indicator flash-
es.
Press MUTE again to resume your
phone conversation.
USING FLASH
FLASH performs the electronic equiva-
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH to answer an incoming call
without disconnecting the current call.
Press
FLASH again to return to the first
call.
Note: If you do not have any special
phone services, pressing
FLASH might
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by following
these steps.
1. Be sure DIAL MODE is set to P
( pulse ) .
2. Dial the service’s main number.
3. When the service answers, press
TONE ( ). Any additional numbers
you dial are sent as tone signals.
4. After you complete the call, return
the handset to the base or press
TALK . The phone automatically re-
sets to the pulse mode.
M 1 M2 M 3 M4
43-1104.fm Page 14 Wednesday, August 18, 1999 8:05 AM