Renesas M16C/29 User Manual
Page 2
2. Connection
11
Now connect the E8a to J5/E8 on the RSK using the ribbon cable.
12
Connect the E8a module to a spare USB port.
The ‘Found New Hardware’ Wizard will appear. Please follow the steps below to install the drivers. Note that administrator privileges are
required for a Windows™ 2000/XP machine. Do not use the Windows Update to locate the driver.
13
Verify the “Recommended” option is selected and click
14
If using Windows XP, skip to step 16; otherwise click
15
Click
16
Click
Note: The Windows driver signing dialog may be displayed. Please accept the driver to continue.
3. HEW
Workspace
HEW integrates various tools such as compiler, assembler, debugger and editor into a common graphical user interface. To learn more on how to use
HEW, open the HEW manual installed on your computer (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > Manual
Navigator).
17
Launch HEW from the Start Menu. (Start Menu > All Programs > Renesas > Renesas High-performance Embedded Workshop).
18
In the “Welcome” dialog box: Verify “Create New Workspace” is selected. Click
19
In the “New Project Workspace” dialog box: Set the “CPU Family” to “M16C”, and verify the “Tool chain” is set to “Renesas M16C Standard” .Select
“E8A_RSKM16C29” from the left hand pane.
20
Enter a name for the workspace. The project name will be automatically completed with the Workspace name. You can change this name to
‘Tutorial’ if required. Click
21
On the “E8A_RSKM16C29– Step 1” window: Select “Tutorial” and click
22
On the “E8A_RSKM16C29– Step 2” window: Click
23
On the Project Generator Information window: Click
The project that is created has two configurations. The Release configuration can be used for the final release code version. The Debug
configuration allows modifications to the configuration for debugging.
24
Select the Debug build configuration in the left hand drop down list on the
tool bar.
25
Click on the ‘Build’ icon to compile, assemble and link the
project.
D006174_11_S01_V04