RCA SCT-560 - Manual (Page 12)

12
CD-Deck Synchro Recording
If your CD player has a compatible CD Synchro function,
you can automatically record your CDs. Connect the CD
player’s and cassette deck’s
CD SYNCHRO jacks as
described in “Connecting the CD-Deck Synchro Control
Cable.”
Note: A 4 1 / 2 -second blank space is automatically created
between selections.
1. Load a compact disc in the CD player.
2. Load a blank tape (or one you want to record
over) into Deck 2. Be sure the side you want
to record on is facing you and the full reel is
to the left.
3. Press on Deck 2 to set the tape direction and
then press .
4. Set REV MODE and DOLBY NR .
5. Press RECORD .
6. Select the CD player on the receiver/amplifier,
then begin play on the CD player.
7. Adjust the recording level.
8. Press the stop buttons on the cassette deck
and the CD player.
9. Press CD SYNCHRO RECORD . Recording
automatically begins.
When the compact disc finishes playing, the CD
player stops and the cassette deck pauses. Within 1
minute, change the disc and start play on the CD player to
resume recording. If the CD player does not start play
within 1 minute, the cassette deck stops.
When the CD player changes discs (multi-disc CD players),
the cassette deck pauses, then resumes recording when
the CD player begins playing the next disc.
If the cassette deck reaches the end of the tape and
stops while the CD plays, the CD player returns to the
start of the current track, then pauses. To resume
recording, load another tape and ensure the tape is
moving in the desired direction. If it is not, press a play
button (
3 or 2 ) on the cassette deck to change the tape
direction, then immediately press
7. You can resume
recording by pressing CD SYNCHRO RECORD again.
(Press the button within 1 minute after the CD player
pauses. If more than 1 minute elapses, the CD player
stops.)
SPECIAL FEATURES
If REV MODE is set to automatically switch to the
other side of the tape and the tape reaches the end of
the first side while the CD player is playing, the CD
player returns to the beginning of the current track and
pauses. A 4
1 /
2
-second blank space is automatically created
on the reverse side of the tape, then the CD player
resumes playback and the deck resumes recording.
PRB1200A.En.01.13.DOC 9/2/99, 9:18 PM 12