RCA F32715 - Manual (Page 36)

34
Features and menus
If you are unsure of the differences
among the modes, you may prefer to
leave the closed captioned mode set to
CC1, which displays complete text of the
program in the primary language in
your area.
Channel Menu
Signal Type Displays a choice list that lets you select the current
antenna type. This option does not appear when the GUIDE Plus+ system
is set up.
UHF/VHF Antenna Choose this if you are currently using an off-air
antenna for TV signals.
Cable TV Choose this if you are currently using cable or a cable box
for TV signals.
Auto Channel Search Tells the TV to search automatically for all the
channels available through the antenna input. When the TV finds an
active channel, it places it in the channel list; inactive channels (weak
stations or channels with no signal at all) will be removed from the
channel list. If you are using a cable box and have setup your GUIDE
Plus+ system, this option will not appear.
List and Labels Displays a control panel that lets you custom-build
your Normal channel list and choose a six-character label for each
channel. Follow the on-screen directions to enter your channels and
other information.
Channel # Use the up and down arrows to scroll up and down
through the channel scan list. You can enter the channel number
directly using the number buttons.
Normal List Only the channels included in the Normal list are
available when you scan up and down using the CH +/- buttons. Use
the up and down arrows to indicate whether the channel number
indicated is included (Yes) or is not included (No) in the Normal
channel list.
Channel Labels Use the up and down arrows to enter a six-
character label for each channel. Hold the button down to scroll
quickly through the characters. Press RESET to clear a label. The TV
can store up to 27 labels in memory.
Auto Tuning Displays a choice list that lets you set up the TV to
automatically tune to the correct input channel when you press a
component button (VCR1, DVD, VCR2, AUX or SAT•CABLE) on the
remote.
Set VCR 1 Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the VCR1 button.
Set VCR2 Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the VCR2 button.
Set DVD Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the DVD button.
Set SAT/Cable Channel Displays a choice list that lets you select
the channel that the TV tunes to when you press the SAT•CABLE
button.
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
CHANNEL
1 Signal Type
2 Auto Channel Search
3 List and Labels
4 Auto Tuning
0 Exit
SET VCR1 CHANNEL
1 Not connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input