Radio Shack 12-1686 - Manual (Page 10)

10 11
The Basics
Setting the Clock
To set your radio’s clock, complete the following steps:
1. Turn on your radio.
2. Press and hold the CLOCK
button until the time display
appears with the hour blinking.
3. Use the TUN - / + buttons to set
the hour and press the CLOCK
button. The minutes value starts
blinking.
4. Repeat step 3 for the minutes, AM/PM, date, month, and year. After you
set the year, the radio display returns to normal with the updated date
and time information.
Saving Preset Stations
To save a frequency in your radio’s memory, complete the
following steps:
1. Press MODE to select the band (AM1, AM2, FM1,
FM2) .
2. Select the frequency.
3. Press PRESET STORE.
4. Use the CH- /+ buttons on the radio or use the
number buttons on the remote control to select
a preset station number.
5. Press PRESET STORE. to save the preset station. If
you don’t press PRESET STORE again within a few
seconds, the radio returns to normal mode without
saving the frequency in memory.
Note: Your radio provides six preset positions for each band (AM1, AM2, FM1,
Preset station
number
Currently saved
frequency