Mounting the router – Ryobi RT501W User Manual

Page 17

Text mode
Original mode

MOUNTING THE ROUTER

See Figure 19

9. Position all 4 clamps on the adapter plate and tighten

securely with the 4 knobs.

10. Place the router table on its legs.

NOTE: Use a minimum of 3 clamps to secure the router
to the table.

NOTE: Routers larger than 2Hp should be mounted direct-
ly to the table top with mounting screws as described on
page 15.

NOTE: To remove the router when using the universal
clamping system, it may be necessary to disassemble one
or more of the clamps that secure the router to the table
top.

Fig. 19

See Figure 18

8. Place clamp (R), swivel piece (Q), washer (AE), and

knob (S) on screw (AC) as shown. Leave assembly
loose to allow clamp to be adjusted. Repeat the above
procedures for the 3 remaining clamps.

Fig. 18

AE (4)

Bdal 6146.461 3Sprachen 04.06.2005 11:58 Uhr Seite 17