RCA VR336 - Manual (Page 22)

20
VCR MAIN MENU
1 Timer Recordings
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
Recording a Program
Recording While You’re Away (Timer Recording)
Checking or Clearing Timer Recordings
1. Press MENU on remote to display VCR MAIN
MENU
on TV screen.
2. Press 1 to display the TIMER RECORDINGS menu.
3. Press 2 for Review Existing Progs. feature.
4. Press MENU to display the next program or press
CLEAR
to erase the program on the screen.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the
AUDIO
and VIDEO IN jacks of the VCR. Recording from
the line input is convenient if you have a satellite
receiver or similar component attached to these jacks.
To timer record from the component connected to the
VCR’s line input:
Press INPUT to enter VIDEO instead of the channel
number on the TV screen during timer programming.
Recording Features
Recording Pause
To prevent recording short passages of unwanted material, use PAUSE during
recording to stop and start recording. The VCR automatically switches from pause
to stop after a few minutes.
Program 1 (One Time)
Channel 08
Start Time 02:10 PM
End Time 03:35 PM
Start Date 08/04/96 Sun
Tape Speed SLP
Press CLEAR to erase
Press MENU for next prog
Program 1 (One Time)
Channel VIDEO
Start Time 02:10 PM
End Time 03:35 PM
Start Date 08/04/96 Sun
Tape Speed SLP
Press CLEAR to erase
Press MENU for next prog