RCA VR336 - Manual (Page 5)

3
Hooking Up the VCR
OUT TO
TV
IN FROM
ANT.
CH
3
5 6 4 AUDIO
VIDEO
IN OUT
Back of VCR
Back of TV
300/75 Ohm
Adapter
OR
From Antenna
or Cable
Cable/
Antenna
OR
VHF
UHF
RF Coaxial Cable
(supplied)
75 to 75/300 Ohm
Separator
Antenna or Cable System Without a Cable Box
A. Basic hookup.
Use this hookup for a basic connection
which requires fewer accessories.
1. Set the CH 3 5 56 64 switch on back of VCR
to either channel 3 or 4.
Tune the TV to this channel and use the
TV•VCR
button to watch the VCR.
2. Connect as shown.
This connection may require additional
accessories not provided.
3. Plug in power cords of VCR and TV.
4.
B. Advanced hookup.
Use this hookup for slightly improved
picture quality and more convenient
operation — use of TV•VCR button is not
required.
1. Connect as shown.
This connection requires additional
accessories not provided. A Y-adapter
may be required to hear sound from both
channels if your TV is stereo.
2 . Plug in power cords of VCR and TV.
3.
Tune the TV to its LINE (audio/video)
input to watch the VCR. All pay channels
are viewed through the VCR.
Set the AUTO TV/VCR feature to OFF. See
Auto TV/VCR step in “Startup” section.
Go to “Startup” section.
Go to “Startup” section.
OUT TO
TV
IN FROM
ANT.
CH
3
5 6 4 AUDIO
VIDEO
IN OUT
Back of VCR
S-VIDEO
AUDIO
CABLE /
ANTENNA L /
MONO
RIGHT
VIDEO
INPUT
IN OUT
From Antenna
or Cable
OR
Back of TV
300/75 Ohm
Adapter
Audio/Video Cables
RF Coaxial Cable
(supplied)
A
B