Radio Shack CD-3316 - Manual (Page 7)

7
RADIO OPERATION
Warning: To protect your hearing, set
VOLUME to its lowest setting before
you turn on the radio.
1. Set FUNCTION to RADIO to turn on
the radio. The POWER indicator
lights.
2. Set BAND to FM or AM .
3. Adjust TUNING to the desired sta-
tion.
Notes:
• For the best AM reception, rotate
the CD-3316 to position the built-
in AM antenna.
• For the best FM reception, fully
extend the telescoping antenna
and swivel it to the position that
produces the best reception.
• The FM STEREO indicator lights
when you receive an FM signal in
stereo.
• If FM stereo reception is noisy, set
BEAT-CUT/FM-MODE to MONO .
The sound is no longer in stereo,
but reception improves.
4. Adjust VOLUME and TONE to the
desired levels.
5. Press SBS to enhance the bass
sounds while playing the radio.
Press the button again to turn the
SBS system off.
6. Set FUNCTION to RADIO OFF/
TAPE to turn off the radio.
14-540.fm Page 7 Wednesday, June 30, 1999 2:27 PM