Radio Shack CD-3316 - Manual (Page 11)

11
CASSETTE PLAYER OPERATION
LOADING A CASSETTE
TAPE
Note: Take up any slack in the tape by
turning the hub with a pencil. If you do
not remove excess slack, the tape
might become tangled in the record/
playback mechanism. Avoid touching
the tape.
1. Press STOP/EJECT to open the
cassette compartment cover.
2. Insert the cassette tape with the
side you want to play or record on
facing you, and the exposed tape
edge facing down.
3. Close the cover.
PLAYING A CASSETTE
TAPE
1. Set FUNCTION to TAPE .
2. Load a cassette tape.
3. Press PLAY . The power indicator
lights and the tape player plays
the cassette tape until it reaches
the end, then it automatically
stops.
Notes:
• To temporarily stop playback,
press PAUSE . Press PAUSE again
to resume.
• To rapidly wind the tape forward or
backward, press F-FWD or REW .
The cassette deck automatically
stops at the end of the tape.
• Always remove and store cassette
tapes when you are not using
them.
4. Adjust VOLUME and TONE to the
desired levels.
5. Press SBS to turn on the SBS sys-
tem. Press the button again to
turn it off.
6. To manually stop play, press
STOP/EJECT . The POWER indica-
tor turns off. Press STOP/EJECT
again to open the cassette com-
partment.
14-540.fm Page 11 Wednesday, June 30, 1999 2:27 PM