Roberts Radio CR9916 - Manual (Page 9)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Programmed play
By programming the player you can play up to 20 tracks in any desired
order.
1. Whilst the CD is in STOP mode, press the Memory button. The
display will show ‘ P 01’.
2. Select the first track using the F.skip or B.skip buttons. The track
number will flash on the display. Store this track by pressing the
Memory button.
3. Repeat the above steps until you have completed your program. Press
the Play/Pause button to commence play of the selected tracks.
Note: the display will revert to showing time after 5 seconds of inactivity.
Erasing a programme
1. Press the Memory button. The Memory indicator will flash. Press
the Stop button to erase the programme. Programmes are also
erased by opening the CD door and interrupting the mains supply.
Memory
2
2
Down/
B.skip Up/
F.skip
Memory
Checking a programme
1. Whilst the CD is in STOP mode, repeatedly press the Memory button
to step through the tracks programmed.
Memory 2
Memory
Memory
Stop
8