Roberts Radio CR9916 - Manual (Page 11)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Checking the Alarm Times
1. To check alarm 1 time, set the Alarm 1 function switch to the 'Adj'
position. Alarm 1 time will flash in the display.
2. Return the Alarm 1 function switch to the 'Off' position. The display
will revert to showing time.
3. To check alarm 2 time, set the Alarm 2 function switch to the 'Adj'
position. Alarm 2 time will flash in the display.
4. Return the Alarm 2 function switch to the 'Off' position. The display
will revert to showing time.
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
10
1
2
Adj
On
Off
1
2
Adj
Adj
On
Off
2
Adj
On
Off
Music
2
Adj
On
Off
Music
Setting the alarms to wake to buzzer
1. Set the alarm time as previously described. Set the Alarm function
switch to the 'Buzz' position. Set the Alarm 1 or Alarm 2 selector
switch to the 'On' position. The corresponding Alarm indicator will
light.
2. Press the Power button to switch off your CD clock radio, the Power
indicator will switch off.
3. The buzzer alarm will sound every day at the preset time for 60 minutes.
To turn off the alarm until the next day press the Power button. To turn
off the alarms permanently set the Alarm 1 or Alarm 2 function
switch to the 'Off' position.
Note: Alarm 1 has a low tone Alarm 2 has a high tone.
PM
1 2
1
2
Adj
On
Off
Power
1
2
Adj
Adj
On
Off
Music
Buzz