Roberts Radio CR9916 - Manual (Page 5)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Listening to the Radio
1. Switch on your CD clock radio by pressing the Power button. The
Power indicator LED will light.
3. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated in the dial scale.
The Wire aerial located on the rear of your CD clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
For MW reception there is a built in ferrite aerial. Rotate your CD clock
radio to the position giving best reception.
4. Adjust the volume by rotating the Volume control.
5. The radio can be switched off by pressing the Power button. The
Power indicator will switch off
4
CD
MW
FM
FMSt.
88
540
92
600
96
800 700
100
1000
104 106
1300
108
1600
MHz
kHz
FM
MW
Tuning
2. Slide the Function switch to the required waveband.
Power
Power
Vol