La b te st – Ricoh Aficio MP 1350 User Manual
Page 14
© 2007 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any man-
ner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will be pros-
ecuted to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact BLI at (201) 488-0404. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601. Contact us at [email protected].
LA
B
TE
ST
Ricoh Aficio MP1350
Buyers LaBoratory
Lab TesT RepoRT
© 2007 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any man-
ner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will be pros-
ecuted to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact BLI at (201) 488-0404. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601. Contact us at [email protected].
LA
B
TE
ST
Ricoh Aficio MP1350
Buyers LaBoratory
Lab TesT RepoRT
PMs/Malfunctions
Service Required
Meter Count
(Impressions)
Impressions
Between Service
Meter count (beginning of test)
615,000
PM
Performed PM
744,037*
PM
Performed PM
1,110,843
366,806
PM
Performed PM
1,452,664
341,821
End of test period
1,615,000
Total Misfeeds/Misfeed Rate
10/1 per 100,000
impressions
Service Calls
0
PMs
3
Total Service Calls (including PMs)
3
Note: The results above are for a retest of the unit after the installation of a new duplex unit and duplex mylar guide.
The device's firmware was also upgraded.
* Fusing unit is scheduled to be replaced at every 750,000 impressions.
MULTITASKING EVALUATION
Secondary
Function
Primary
Function
SCAN
COPY
YES
YES
YES
SCAN
YES
YES
YES
COPY
YES
YES
YES
NOTE: (X) indicates number of occurrences. A “Yes” indicates that the user can initiate the secondary function while the
primary function is taking place and that no further user intervention will be required for the secondary function to take
place.
In addition to a single-user multitasking test, which evaluates a unit’s ability to initiate or perform one function while
another function is already in progress (see chart above), BLI also tests a multifunctional product’s ability to handle
multiple jobs that would be likely to stack up in a multi-user networked environment.
ReLIABILIty
MuLtItAsKInG
This report has been reproduced with the written permission of Buyers Laboratory Inc. Any duplication of this report, in whole or part, in any form or manner,
without the written permission of Buyers Laboratory, is unlawful and violators will be prosecuted. © 2007 Buyers Laboratory Inc. To purchase reprints,
contact BLI at (201) 488-0404 (x17) or at [email protected].