Roland CDR-88RW-4 - Manual (Page 8)

8
Using this unit in connection with VS series
About limitation of functions
There are some limitation of functions if this unit is used in connection with Roland VS
series.
◆ The following jacks, knobs or button will not be used
• Headphone jack
• Volume Control knob
• Play Button
• Audio Output jacks
◆ Writing Speed
Writing speed to CD-R discs is limited to “x1” or “x4.”
Writing speed to CD-RW discs is limited to “x2” or “x4.”
◆ Reading Speed
Even if the reading speed is set to “x4” or “x8,” the time it takes is not always 1/4 or 1/8
of the original. This is because writing speed to the internal hard disk or errors during
disc reading.
◆ Readable Format
It is limited to “CD-ROM Mode-1” or “CD-DA.”
◆ Recordable Format
It is limited to “CD-ROM Mode-1” or “CD-DA.”
◆ Recording Mode
It is limited to “Track at Once” or “Disc at Once.”
About the CDR-88RW-4’s SCSI Number Setting
SCSI ID number of CDR-88RW-4 must be different from it of Roland VS series itself. The
default SCSI ID number of CDR-88RW-4 is “4.”