RCA 27000 - Manual (Page 8)

Using Your TV and Remote
With Remote Buttons
6
INPUT ANTENNA
SKIP
PREV CH
REC STOP PAUSE
PLAY REW FF
CLEAR RESET
MOVE
MENU
PROG
•
MUTE
DISPLAY
1 2 3
4 5 6
7 8 9
0
POWER
VCR1 SAT • CABLE TV
VCR2
• LD AUDIO
C H AN
CHAN
V
O
L
V
O
L
POWER
Turns off the TV.
Turns off compatible components.
Turns on a component after a
component button is pressed.
AUDIO, VCR1, VCR2•LD,
SAT•CABLE, TV
Sets the remote to control the
component.
VCR2 • LD can only be
programmed for one component:
either a VCR or a Laserdisc Player.
See Using the Remote with a VCR,
Satellite Receiver, Cable Box, Laserdisc
Player and Audio equipment on
pages 8–15.
TV
Turns on the TV.
Shows the displays on the screen.
Sets the remote to control the TV.
See Using the Remote with a VCR,
Satellite Receiver, Cable Box, Laserdisc
Player and Audio equipment on
pages 8–15.
REW (Rewind)
Rewinds a tape or laserdisc.
Searches backward while tape or
laserdisc is playing.
PLAY
Plays tape or laserdisc.
FF (Fast Forward)
Fast forwards a tape or laserdisc.
Searches forward while tape or
laserdisc is playing.
REC (Record)
Starts recording onto tape.
STOP
Stops tape or laserdisc.
PAUSE
Pauses tape or laserdisc.
DISPLAY
Shows displays on the screen.
Clears menus from the screen.
SKIP (Commercial Skip)
Allows you to scan other
channels during commercials.
Each press adds 30 seconds. TV
switches back to original channel
when time runs out. Press
CLEAR to cancel SKIP .
CHAN
2 and 1
( Channel up and down)
Scans up and down through
channels in the TV’s memory.
Moves through channels
in VCR’s memory.
VOL
>
and
<
(Volume up and down)
Raises and lowers sound.
MUTE
Switches the TV sound on or off.
PREV CH (Previous Channel)
Changes back and forth between
two channels.
Select a channel and then select
another. Press
PREV CH to
switch between the two channels.