beautypg.com

Tuner, Tuning to a station, Using presets – RCA A580 User Manual

Page 11: Auto preset programming, Setting presets, Seeking/scanning for a station, Suppressing stereo signal

background image

10

TUNER

1. Press TUNER to select the radio.
2. Press TUNER again to select the next radio band.

Choices are:
AM/FM/FM Stereo (RS models)
FM/MW/LW, RDS (ALTIMA models)
The tuner can be either TUNE or PRESET mode.

When in PRESET mode, the PROG light is on.

Tuning to a Station

1. Press PRESET/TUNE to

select TUNE mode.

2. Either rotate the jog or

press INCREASE or

DECREASE to tune in the desired station.

Using Presets

1. Press PRESET/TUNE to

select PRESET mode.

2. Press DECREASE or

INCREASE, or rotate

the jog to access the
previous or next preset station. The display first
shows the frequency, and after a few seconds, the
program number. (FMPR:01 is FM reset 1)

Auto Preset Programming

Press and hold TUNER button for 2 second to scan sta-
tions in the selected band. The stations will then
stored as preset channels. Maximum 32 stations can
be stored. Beware of your preset channels being
erased accidentally because the scanning and storing
process is automatic upon pressing TUNER button.
You can stop the automatic scan by pressing TUNER
button, but the erased stations cannot be recovered.

Setting Presets

1. Press PRESET/TUNE to access TUNE mode.
2. Press INCREASE or DECREASE, or rotate the

jog to access the desired frequency.

3. Press the SET button once.
4. The most recently accessed program location will

be displayed together with a blinking program icon

(AMPR, FMPR, or LWPR.)

5. If a different program location is preferred, press

INCREASE or DECREASE to move to the desired

preset number (0-32).

6. Press SET to store the selected frequency at that

preset.

Seeking/Scanning for a Station

To seek the next station (ascending), press
SEEK/SCAN.

To scan (ascending) to the next station, stop and play
for 5 seconds and then continue scanning, press
SEEK/SCAN for more than 2 seconds. Scanning contin-
ues until you press another button.

Suppressing Stereo Signal

Press FM STEREO to toggle between FM mono and
stereo for stereo FM stations.

FM(MHz)

AM (kHz)

MW(kHz)

LW(kHz)

FMPR:01

87.50 MH

z

REPEAT

INTRO

SHUFFLE

ATS

PHONES

FM STEREO

POWER

SURROUND

BASS BOOST

ALARM/CLOCK

DISPLAY/DEMO

HELP MODE

S O U N D S Y S T E M

KEVLAR

Tip: Your audio system has several preset stations.

Tip: Press and INCREASE or

DECREASE for more than 1second to

automatically tune up/down the band

for the next station.

Factory Presets

GB

87.50
90.10
98.10
106.10
107.9

520
600
1000
1400
1710

522
603
999
1404
1611

150
170
200
270
283

UG-2501 rev 1 9/2/99 3:24 PM Page 13

This manual is related to the following products: