beautypg.com

Connections and setup, Things to consider before you connect – RCA RTD217 User Manual

Page 5

background image

EN

1

Things to consider before you
connect

• Ensure that the mains supply in your house

complies with that indicated on the
identification sticker located on the back of
your unit.

• Install your unit horizontally, away from any

source of heat (fireplace) or appliances
creating strong magnetic or electric fields. The
components of this unit are sensitive to heat.
The maximum ambient temperature should
not exceed 35°C/95°F.

• Leave enough space around the unit to allow

adequate ventilation: 10 cm/4 inches on either
side and above the top, and 5 cm/2 inches at
the rear.

• The humidity of the room should not exceed

75%. If you have to use the unit outdoors, do
not expose it to rain or splashing water. The
apparatus should not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, should be placed on the
apparatus.

• Moving the unit from a cold place to a warm

one can cause condensation on some
components inside the unit. Let the
condensation disappear on its own before
turning the unit on again.

• Before moving the unit, make sure the disc

tray is empty.

• Where the mains plug or an appliance coupler

is used as a disconnect device, the disconnect
device shall remain readily operable.

• Other important use and cleaning information

at the end of the booklet.

Connections and Setup

Remote control and 2
non-rechargeable AAA
batteries

Left and right

Surround

Speakers

Composite

Video Cable

One Pig-Tail

antenna wire