Roland CUBE-30X - Manual (Page 10)

10
Sample Settings
Alternative Metal
The perfect sound for heavy, sharp riffs.
Select the high-gain R-FIER amp, then use the equalizer to
boost the low end even more.
Used with a humbucking pickup in the rear position, it
results in an extreme distortion effect.
Plus, you can add a long delay to use this as a lead sound
with great sustain.
Adding a short delay produces a doubling sound like that
from two performers playing the same phrases
simultaneously.
Space Clean
This is a transparent sound using spacial effects.
Select the JC CLEAN amp, modeled on the Roland JC-120,
then add chorus and long delay.
Using this setting with a guitar equipped with single coil
pickups makes great sounding arpeggios and chord
strumming.
Depending on the phrase being played, it can be effective
to set the delay sound’s delay time slightly slower than the
phrase’s tempo.
Classic Rock
This is a 70s-style rock sound.
Turning up the gain produces a powerful rock sound in all
riffs and solos.
A powerful low end is a characteristic of the sound emitted
by the surfaces of the cabinet, so you can turn up the
equalizer knobs, especially the BASS knob, and increase to
produce a sound with great punch.
Turning down the GAIN knob is also a perfect way to get a
sharp crunch sound.
Dynamic Style
DYNA AMP is an original amp that uses relative picking
strength to create changes in distortion depth.
First, adjust the GAIN knob so that a clean tone is obtained
with soft picking and deep distortion is obtained when you
pick hard.
Now, mixing arpeggios played with a gentle touch along
with firmly picked chords and solos results in a guitar
sound with huge dynamics.
Now, to create a broader, more open sound, cut the
midrange and raise the low end.
Using this in combination with the EFX and delay and
reverb creates a sound with an even greater feeling of scale.
SELECT : LEAD
SELECT: JC CLEAN
SELECT : LEAD
SELECT : LEAD
CUBE-30X_e.book 10 ページ ２００６年７月２４日 月曜日 午後２時１９分