RCA Color TV - Manual (Page 4)

5. Edit the channel memory.
You can add and erase channels from
memory as desired.
• Press MENU on the TV front panel
repeatedly to highlight SETUP. Then
press + to select the SETUP menu.
• Press MENU on the TV front panel
repeatedly to highlight EDIT
CHANNELS.
• Press + to select EDIT CHANNELS.
• Select the desired channel number by
pressing the CHANNEL up or down
button.
• Then press + to add a channel, or
press – to erase a channel. Details
are on page 6.
• Press DISPLAY to remove the menu
from the screen.
3. Plug in the TV.
Plug in the TV, matching the wide and
small blade of the plug with the outlet.
4. Turn on TV and place channels
in memory.
Your TV is designed to place active
channels into your TV's memory the first
time you turn it on.
• Press POWER on the TV to turn on the
TV.
• The TV automatically cycles through
all channel numbers and places active
channels into the channel memory.
When your TV is finished, it tunes to
the lowest channel number in its
channel memory.
AUTOPROGRAM
ANTENNA:CABLE
– EDIT CHANNELS +
2
1. Unpack TV and accessories.
Shown below are the accessories that
came packed with your TV.
2. Connect antenna or cable-TV
system.
Most antenna or cable-TV systems can
be connected as shown here.
• Details for connecting a home antenna
to your TV are on page 8.
• Details for connecting a cable-TV
system to your TV are on page 9.
First-Time Operation
Getting Started
ANTENNA
Incoming Cable from Antenna or
Cable-TV System
Back
of TV
VIDEO
CAPTION OFF
– SETUP +
MUTE
Antenna Adapter
Replace adapter only
with stock #193983.
Dipole Antenna
The steps below will help you get your TV connected and working quickly.
Page numbers are also listed for more details.
– ERASE / ADD +
12 –