Roku SoundBridge Radio Wi-Fi Music System - Manual (Page 11)

9
SECTION 2: PLAYING AM/FM RADIO
Introduction
Listening to AM/FM radio stations is similar to your experience with other radios. You can scan
for available stations and then store up to 18 of them as Presets.
If SoundBridge Radio is turned off, press the Standby [�] button on the remote control or
press any of the Preset buttons (numbered 1-6) or the Source [ ] button on SoundBridge
Radio. To tune in to an AM/FM station, press the Source [ ] button until “FM Radio” or “AM
Radio” is displayed, and then use the Scan Up [ ] and Scan Down [ ] buttons on the radio
or the Next Track/Previous Track [ : 9 ] buttons on the remote control to find stations.
SoundBridge Radio will rapidly search for radio stations with a strong signal. To tune in to a
specific station by frequency, press the up or down arrow on your remote at any point while
listening to the radio. You will see a list of frequencies similar to this:
X
)) 105.3 FM
105.5 FM
105.7 FM
The speaker icon X)) indicates the station currently playing. Use the Up/Down arrows on
your remote to move through the list one by one, or the Left/Right arrows to move by larger
increments. Your selection is denoted by an arrow. Press Select to play a selected frequency.
SoundBridge Radio Buttons
On the top of the unit, you will see the following buttons.
Icon Name Action
Source Selects between AM/FM, SD Card/Internet radio, or a Music Library.
Scan Up (Forward) Scans or scrolls forward. (Same as the Next Track 9 button on your remote control.)
Scan Down
(Backward) Scans or scrolls backward. (Same as the Previous Track : button on your
remote control.)
2
Section 2: Playing AM/FM Radio