Rose electronic CRYSTALVIEW PRO CAT5 - Manual (Page 12)

8
CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATIONS MANUAL
Select graphic source menu
The Input Select menu is the first menu to display when the OSD is
activated. This menu allows you to select the graphic source type. This is
typically the video card type, VGA or DVI. Use the left or right arrow keys to
select VGA or DVI and press [Enter}.
The actual graphic source is displayed with a check mark.
Figure 2. Input select menu
The Scale mode menu allows you to set a fixed resolution at the
receiver or use the resolution sent from the transmitter.
Figure 3. Scale mode menu